TeraDuct One is designed for impact resistance and fiber optic cable entry. The exterior is slick, while the interior presents a ribbed silicone layer. The product comes in two versions: TeraDuct LINE and TeraDuct MIX.
TeraDuct One is available in two versions: one for installation in an existing single pipe (direct install) and another for direct burial on a sand bed (direct buried).
– Impact resistant and pressure resistance at least 15 bar
– Ribbed inner coating made of silicone, which enables easy installation of the fiber optic cable
– Available in opaque colors according to the IEC 60304 standard
– Signal wire (on request)
– Antistatic interior layer that can reduce electrostatic charge accumulated during the blowing of the optical fiber (upon request).
This is a product from the TeraPlast portfolio, manufactured by extrusion from high-density polyethylene (HDPE) according to IEC 60694. The outer surface of the microtube is smooth, while the inner surface has a ribbed silicone lining that facilitates easy installation of the fiber optic cable. TeraDuct One is designed for impact resistance and the insertion of fiber optic cables. This product can be used in TeraDuct Line or TeraDuct Mix packages.Underground installation (DB)
In applications where TeraDuct microducts are buried or used in combination configurations (TeraDuct Mix), it is recommended to use a microduct with thicker walls to maintain optimal filling ratios and to enable faster and easier installation.
Direct Installation (DI)
In applications where TeraDuct One or TeraDuct Mix is to be installed in an existing pipe, it is recommended to use a product with thinner walls, while still ensuring protection through the existing pipe.
– Impact resistant and pressure resistance at least 15 bar
– Ribbed inner coating made of silicone, which enables easy installation of the fiber optic cable
– Available in opaque colors according to the IEC 60304 standard
– Signal wire (on request)
– Antistatic interior layer that can reduce electrostatic charge accumulated during the blowing of the optical fiber (upon request).
Cable protection qualitiesThis is a product from the TeraPlast portfolio, manufactured by extrusion from high-density polyethylene (HDPE) according to IEC 60694. The outer surface of the microtube is smooth, while the inner surface has a ribbed silicone lining that facilitates easy installation of the fiber optic cable. TeraDuct One is designed for impact resistance and the insertion of fiber optic cables. This product can be used in TeraDuct Line or TeraDuct Mix packages.Underground installation (DB)
In applications where TeraDuct microducts are buried or used in combination configurations (TeraDuct Mix), it is recommended to use a microduct with thicker walls to maintain optimal filling ratios and to enable faster and easier installation.
Direct Installation (DI)
In applications where TeraDuct One or TeraDuct Mix is to be installed in an existing pipe, it is recommended to use a product with thinner walls, while still ensuring protection through the existing pipe.
Used plastic products are a valuable resource and should therefore go through another life cycle. This reduces CO₂ emissions, which not only benefits future generations, but also your company directly. We offer three different quality classes within the EQ-LINE: Q3, QZM, QSB.
Solid wall cable protection pipe, inside-outside smooth surface.
Cable protection pipe outside smooth, inside ribbed